These residences, constructed in factories and transported to their final locations, offer a cost-effective housing solution. Their defining characteristic is their width, achieved by joining two separate sections at the site. This design differentiates them from single-wide counterparts, resulting in significantly larger living spaces. A common example features a width of approximately 20 to 36 feet and a length ranging from 50 to 90 feet.
The appeal of this type of housing lies in the balance between affordability and spaciousness. Compared to traditional site-built homes, these structures present a lower initial investment, while still providing ample room for families. Historically, they offered an alternative to apartment living, particularly in areas with limited housing options. Their development has broadened access to homeownership for many individuals and families.
Understanding the size parameters is crucial when considering purchase, site preparation, and transportation logistics. The subsequent sections will detail specific size variations, considerations for lot size, and the implications for interior design and layout options available within this type of dwelling.
1. Width and Length
Width and length are the defining measurements of a double wide manufactured home, fundamentally dictating its overall footprint and interior space. These dimensions directly impact everything from livability to transportability. A larger width, for example, can translate into more open living areas and wider hallways, while a greater length can accommodate more bedrooms or larger individual rooms. These measurements are not arbitrary; they are carefully considered during the design and manufacturing processes to balance structural integrity with consumer demand for spacious and functional homes. A double wide with dimensions of 28 feet wide by 76 feet long will offer significantly more square footage than one measuring 24 feet wide by 60 feet long, directly influencing its suitability for larger families or those desiring ample living space. Understanding these core measurements is paramount when evaluating different models and floor plans.
Furthermore, the interplay between width and length affects site preparation and placement. A wider unit may require a larger plot of land to ensure compliance with local zoning regulations and setback requirements. Conversely, a longer unit may present challenges related to transportation along narrow roads or installation on sites with limited access. For instance, securing permits for transporting a unit exceeding a certain width can be more complex and costly, potentially influencing the overall cost of the project. The dimensions directly influence the foundation requirements, as wider and longer units necessitate more substantial support systems to ensure stability and prevent structural issues over time.
In summary, width and length are not merely numbers; they are foundational elements defining the character and practical considerations of a double wide manufactured home. Their careful assessment is crucial for prospective buyers to ensure the home meets their spatial needs, complies with local regulations, and can be successfully transported and installed on their chosen site. Overlooking the implications of these dimensions can lead to unforeseen complications and expenses.
Frequently Asked Questions
The following addresses common inquiries regarding the size specifications of double wide manufactured homes, providing factual information for informed decision-making.
Question 1: What constitutes the typical range for double wide manufactured home dimensions?
These residences generally range from 20 to 36 feet in width and 50 to 90 feet in length. This results in a square footage range from approximately 1,000 to over 3,200, contingent upon the specific model and manufacturer.
Question 2: How do the dimensions of a double wide compare to those of a single wide manufactured home?
A double wide, as the name suggests, is created by joining two single sections. Consequently, it offers significantly greater width and overall square footage compared to a single wide. Single wides are typically 12 to 18 feet wide, limiting their interior space considerably.
Question 3: Do these size parameters affect transportation and site preparation?
Yes, the dimensions have direct implications for transportation. Wider units may require special permits and escorts. Site preparation must accommodate the chosen dimensions, ensuring adequate foundation support and compliance with local zoning regulations regarding setbacks and lot coverage.
Question 4: Are there standard interior room sizes dictated by the overall double wide manufactured home dimensions?
While there are no universally mandated interior room sizes, the outer dimensions influence the potential layout and room proportions. Wider units allow for larger rooms and more flexible floor plans. The dimensions also dictate hallway widths and the placement of doorways and windows.
Question 5: Can the dimensions be customized or altered after the home is manufactured?
Customization is typically limited to options offered by the manufacturer during the initial ordering process. Altering the structural dimensions after manufacture is generally not feasible due to engineering and code compliance requirements.
Question 6: What impact do these measurements have on the home’s perceived value?
Larger double wide manufactured home dimensions generally correlate with higher perceived value due to the increased living space and potential for more bedrooms and bathrooms. However, location, condition, and other features also contribute significantly to the overall value.
In summary, awareness of the spatial configurations is essential for making informed choices about manufactured housing. Understanding these dimensional aspects will aid in selecting a home that aligns with individual needs and preferences.
The next section will delve into the specific dimensional requirements for various room types within a double wide.
Dimensions of Double Wide Manufactured Homes
This section presents critical guidelines for assessing the size characteristics, ensuring alignment with individual needs, regulatory compliance, and long-term satisfaction.
Tip 1: Verify Local Zoning Regulations. Confirm local zoning ordinances regarding minimum lot sizes, setback requirements, and permissible home dimensions. Failure to comply can result in costly delays or rejection of the installation permit.
Tip 2: Assess Transportation Feasibility. Evaluate transportation routes from the manufacturing facility to the intended site. Narrow roads, low bridges, or sharp turns can impede the delivery of the home, necessitating alternative routes or specialized transportation equipment.
Tip 3: Evaluate Foundation Requirements. Determine the foundation requirements based on the specific unit dimensions and local building codes. A larger home requires a more robust foundation to ensure structural integrity and prevent settling or other issues.
Tip 4: Consider Interior Layout and Functionality. Prioritize interior space planning based on intended usage and lifestyle. Open-concept designs maximize the perception of space, while defined rooms offer privacy and separation.
Tip 5: Account for Future Needs. Project future housing requirements. Selecting a home with dimensions that accommodate potential family growth or evolving lifestyle needs can prevent the need for future relocation.
Tip 6: Compare Models Across Manufacturers. Obtain detailed dimensional specifications from multiple manufacturers. Comparing these specifications allows for informed decisions based on available space and budgetary constraints.
Tip 7: Evaluate Resale Value Implications. Recognize that the physical size affects its marketability. Larger homes generally command higher resale values, but local market conditions must be considered.
Tip 8: Plan for Landscaping and Exterior Features. Factor in landscaping and exterior features when planning your plot. Larger dimensions often mean smaller garden space which has to be planed for.
In summation, diligent consideration of spatial configurations is paramount. These considerations will facilitate the selection of a suitable dwelling while mitigating potential challenges.
The subsequent discussion will explore the interior design and customization options available for the selected model.
Conclusion
The preceding analysis underscores the critical importance of understanding spatial configurations when considering manufactured housing. Dimensions of double wide manufactured homes directly influence affordability, site suitability, interior layout possibilities, and long-term value. A comprehensive evaluation of these size parameters, in conjunction with local regulations and individual needs, is essential for informed decision-making.
Prospective buyers are strongly encouraged to meticulously assess all dimensional specifications before proceeding with a purchase. Thorough due diligence will mitigate potential challenges and ensure the selection of a dwelling that aligns with both immediate requirements and future expectations, ultimately contributing to a successful and satisfactory homeownership experience. Ignoring the implications of size can have significant and lasting consequences.
