A manufactured home built in two sections, transported separately, and joined at the site of installation generally exhibits a width between 20 and 40 feet. The length typically ranges from 60 to 90 feet. These dimensions can vary based on the manufacturer and specific model. For instance, a common configuration might be 24 feet wide and 72 feet long, resulting in a living space of approximately 1,728 square feet.
The appeal of this type of housing lies in its affordability and efficient use of space. Historically, it has provided a viable housing option for individuals and families seeking comfortable living arrangements at a lower cost compared to traditionally built homes. The availability of various floor plans and customization options further enhances its practicality as a residential solution.
Understanding these common measurements is essential when considering transportation logistics, site preparation, and interior design. The following sections will delve into specific size variations, factors influencing these dimensions, and considerations for optimizing living space within these modular homes.
1. Width
The width of a double wide manufactured home is a primary factor determining its overall size and livability. This dimension directly influences floor plan options, room sizes, and the feeling of spaciousness within the dwelling. It also presents significant considerations for transportation, site preparation, and adherence to local regulations.
-
Impact on Floor Plan
Increased width allows for more flexible and expansive floor plans. A wider unit can accommodate larger kitchens, living rooms, and master suites. It also facilitates the creation of open-concept designs, which are increasingly popular. Conversely, a narrower width may necessitate compromises in room size and layout. The available width is a fundamental constraint and opportunity in the design process.
-
Transportation Logistics
The width of each section of a double wide is a critical factor in transportation. Exceeding certain width limits requires special permits and escort vehicles, increasing transportation costs and potentially restricting route options. Standard widths are designed to minimize these logistical challenges. Understanding width restrictions is essential for planning the delivery and setup of the home.
-
Site Preparation and Foundation Requirements
The width dictates the size of the foundation required to support the structure. A wider home necessitates a larger and potentially more complex foundation, which can impact site preparation costs. The foundation must be properly sized and leveled to ensure the stability and longevity of the home. Accurate width measurements are crucial for ensuring proper foundation construction.
-
Compliance with Regulations
Local zoning regulations often impose restrictions on the maximum width of manufactured homes. These regulations may vary depending on the location and specific zoning district. Failure to comply with width restrictions can result in fines or the inability to obtain necessary permits. Thorough research of local regulations is a critical step in the purchasing process.
In summary, the width of a double wide profoundly affects its design, transportation, site requirements, and regulatory compliance. Selecting a unit with an appropriate width is essential for achieving a comfortable and compliant living space. Careful consideration of these factors is necessary to ensure the successful integration of the home into its intended location.
Frequently Asked Questions
The following questions address common inquiries regarding the dimensions of double wide manufactured homes, offering clarity on sizing aspects.
Question 1: What is the typical range of widths for a double wide?
The breadth generally spans from 20 to 40 feet, subject to manufacturer specifications and model variations. This width significantly influences the internal layout and overall floor space.
Question 2: How does the length of a double wide typically compare to its width?
Lengths generally extend from 60 to 90 feet. The combination of width and length determines the total square footage and potential room arrangements within the dwelling.
Question 3: Does the cited dimension of “what size is a double wide trailer” include exterior features like siding or roofing overhangs?
Dimensional specifications commonly refer to the primary structure’s measurements, potentially excluding external elements such as siding, roof overhangs, or attached features. Exact details ought to be verified via manufacturer documentation.
Question 4: Do state or local regulations impact the maximum permissible size for a double wide dwelling?
Zoning regulations and local ordinances might prescribe size limitations for manufactured homes. Adherence to such guidelines is crucial during site selection and permitting processes.
Question 5: Is there a standard square footage range generally associated with double wide residences?
Considering typical width and length combinations, square footage commonly ranges from approximately 1,200 to over 2,500 square feet, offering considerable design flexibility.
Question 6: Should interior wall thickness be considered when assessing usable living space of “what size is a double wide trailer”?
Interior wall thicknesses contribute to a minor reduction in overall dimensions. When calculating usable floor space, accounting for wall thicknesses yields a more precise estimate.
Accurate dimensional understanding is vital for ensuring appropriate site planning, transportation logistics, and compliance with pertinent regulations.
The subsequent sections will explore the customization possibilities and spatial optimization techniques relevant to these homes.
Optimizing Space Within a Double Wide
Efficient space management is paramount within manufactured homes. The following tips provide insights into maximizing utility and comfort given the dimensions of “what size is a double wide trailer.”
Tip 1: Prioritize Open Floor Plans: Open layouts, where living, dining, and kitchen areas flow seamlessly, enhance the sense of spaciousness. Removing non-load-bearing walls allows for improved traffic flow and a more expansive feel.
Tip 2: Utilize Vertical Storage Solutions: Shelving units, tall cabinets, and wall-mounted organizers capitalize on vertical space, minimizing clutter and freeing up valuable floor area. Consider installing shelves above doorways or in hallways.
Tip 3: Employ Multi-Functional Furniture: Convertible sofas, storage ottomans, and tables with hidden compartments serve multiple purposes, reducing the need for excessive furniture pieces. This approach optimizes limited square footage.
Tip 4: Maximize Natural Light: Large windows and skylights illuminate interiors, creating a brighter and more inviting atmosphere. Strategically positioned mirrors can further amplify natural light penetration throughout the living space.
Tip 5: Strategically Place Mirrors: Mirrors create the illusion of greater depth and can visually expand smaller rooms. Consider placing a large mirror on a wall opposite a window to reflect light and scenery, enhancing the feeling of openness.
Tip 6: Choose Light Color Palettes: Light and neutral colors reflect light, making rooms appear larger and more airy. Darker colors tend to absorb light, potentially making spaces feel smaller and more confined.
Tip 7: Incorporate Built-In Storage: Built-in shelving, seating, and cabinetry seamlessly integrate with the architecture, maximizing storage potential without encroaching upon valuable floor space.
By implementing these strategies, homeowners can effectively maximize the utility and comfort of their double wide residence, despite the inherent space constraints. Thoughtful design and organization are essential for creating a functional and inviting living environment.
The concluding section will summarize the key points discussed and offer final considerations for prospective buyers and current owners.
Conclusion
This exploration of double wide trailer dimensions has provided a comprehensive overview of critical sizing considerations. Understanding the width, length, and their combined impact on square footage is paramount. The information presented clarifies how these dimensions influence transportation logistics, site preparation, regulatory compliance, and interior design possibilities. The common queries addressed highlight the importance of precise measurements and adherence to local zoning ordinances. Practical strategies for optimizing space within these dwellings emphasize the potential for comfortable and functional living environments.
Accurate knowledge of double wide dimensions empowers informed decision-making. Prospective buyers and current owners are encouraged to consult manufacturer specifications and local regulations to ensure their housing choices align with practical and legal requirements. A thorough understanding of “what size is a double wide trailer” fosters successful planning and long-term satisfaction.
